NBR (Nitrile)
Nitrile rubber is the oil-service material — the standard choice for seals that live in oil or fuel.
Typical Properties
| Hardness (typical) | Typically Shore A 30 to 95 |
|---|---|
| Temperature range (typical) | Typically −40°C to about 120°C |
| Key strengths | Good resistance to oils, fuels and greases; good abrasion resistance; widely available in many hardness grades. |
| Limitations to note | Weathering and ozone resistance are limited, and it is not the choice for outdoor exposure or steam — EPDM or silicone fits those better. |
Values shown are typical ranges for the material family. Actual values depend on the compound and are confirmed from the material data sheet for your order.
Typical Applications
- Oil seals — shafts, housings and gearboxes
- O-rings — oil and fuel service
- Fuel-system parts — lines, fittings and caps
- Gaskets — oil-service equipment
What to Specify in Your RFQ
- Hardness — Shore A value your application needs
- Dimensions and tolerances — from the drawing
- Oil or fuel type — state the exact media the part will touch
- Operating temperature — lowest and highest the part will see
- Quantity — trial batch or batch volume
Send the drawing with the specification — hardness, dimensions, operating temperature and media contact decide whether this material fits, and we confirm it from the data sheet before molding.
Compare Materials
Silicone (Solid / HTV)
Solid silicone rubber (HTV) for gaskets, seals, grommets, boots and covers. Typically −60°C to about 230°C, with excellent weathering, ozone and UV resistance.
LSR — Liquid Silicone Rubber
Liquid silicone rubber, injection molded for precise, thin-wall and complex parts in consistent batches.
EPDM
EPDM rubber for weather seals, water-system seals and HVAC gaskets. Typically −50°C to about 150°C, with excellent weathering, ozone and steam resistance.
FKM (Fluoroelastomer)
Fluoroelastomer for fuel, chemical and high-temperature sealing. Typically −20°C to about 200°C, with strong resistance to fuels, oils, chemicals and heat.