FKM (Fluoroelastomer)
FKM is the high-end sealing material — the choice when fuels, chemicals and heat rule the other materials out.
Typical Properties
| Hardness (typical) | Typically Shore A 60 to 90 |
|---|---|
| Temperature range (typical) | Typically −20°C to about 200°C |
| Key strengths | Excellent resistance to fuels, oils, chemicals and heat; low compression set at high temperature; long service in aggressive media. |
| Limitations to note | Higher material cost than NBR or EPDM, and low-temperature flexibility is limited — the application has to need it. |
Values shown are typical ranges for the material family. Actual values depend on the compound and are confirmed from the material data sheet for your order.
Typical Applications
- Fuel-system seals — injectors, pumps and lines
- Chemical-service seals — aggressive media
- High-temperature sealing — engines and hot equipment
- O-rings — fuel and chemical service
What to Specify in Your RFQ
- Hardness — Shore A value your application needs
- Dimensions and tolerances — from the drawing
- Exact media — fuel type or chemical, stated plainly
- Operating temperature — lowest and highest the part will see
- Quantity — trial batch or batch volume
Send the drawing with the specification — hardness, dimensions, operating temperature and media contact decide whether this material fits, and we confirm it from the data sheet before molding.
Compare Materials
Silicone (Solid / HTV)
Solid silicone rubber (HTV) for gaskets, seals, grommets, boots and covers. Typically −60°C to about 230°C, with excellent weathering, ozone and UV resistance.
LSR — Liquid Silicone Rubber
Liquid silicone rubber, injection molded for precise, thin-wall and complex parts in consistent batches.
EPDM
EPDM rubber for weather seals, water-system seals and HVAC gaskets. Typically −50°C to about 150°C, with excellent weathering, ozone and steam resistance.
NBR (Nitrile)
Nitrile rubber for oil seals, O-rings and fuel-system parts. Typically −40°C to about 120°C, with good resistance to oils and fuels.